Magnetic Equipment

Permanent Liquid Traps are installed on pipelines to extract ferrous and weakly magnetic metals from liquid processing and conveying pipelines. Trap design forces the material to pass through magnetic tubes closely spaced to ensure close contact between product and magnetic field. Ferrous contamination is magnetically extracted from the liq- uid by the powerful Rare Earth magnets and held on the tube surface. For cleaning remove the lid -magnetic tube assembly from the housing and wipe off the metal contaminants.

Features:

• High Intensity Rare Earth Magnets encased in SS Tubes.
• The Lid and Housing in Stainless Steel.
• Quick release V- Band coupling in Stainless Steel.
• O- Ring provided between lid and housing.
• BSP threaded or Flanged connection (OPTIONAL).
• For special applications water jacketed design provided.

Models:-

• LT-2 -2" Inlet / Outlet
• LT-3 -3" Inlet / Outlet
• LT-4 -4" Inlet / Outlet

PMG Pipeline Magnet is used for installation on inclined or vertical gravity fed pipe lines for sluggish productsthat tend to choke in a grate magnet. The pipe separator can replace a Bullet/Cartridge magnet and perform more efficiently. A Plate Magnet designed for efficient removal oftramp or fine iron contamination built into a Stainless Steel housing eliminates installation expense and guarantees excellent results. For installation a portion of the existing pipeline is cut and the Pipe Separator is slipped into position. A Stainless Steel baffle provided inside the housing directs the material towards the magnetic face ensuring effective separation.

The choice of the magnet depends on the application. FMP / FHP / REHP / REUHP magnets can be built into the assembly.

REHP model has peak strength in excess of 5500 gauss and REUHP model has peak strength in excess of 8500 gauss on magnet surface. The Plate Magnets are hinged at one end and provided with Stainless Steel Toggle clamps at the other end for locking. The release of the toggle clamps swings the Plate Magnets open and assists in cleaning of the magnet surface.

Ultrareach Magnetic Separators is installed on vertical ducts or vertical pipeline to remove tramp iron from heavy flows of chunky material that normally bridge or choke on other types of magnetic separators. Two powerful magnetic circuit on either side of the Ultrareach ensures a continuous magnetic field through the separator opening. The material can flow through unhindered and any tramp iron present is caught on the face of either of the magnets. The Ultrareach magnets can be made with Ferrite or Rare Earth magnetic circuit.

Rectangular Magnetic Grill are manufactured from the standard 1" diameter Tube Magnets to suit installation in Conical or Rectangular hoppers. These units are available in standard sizes but also custom built to suit the customer requirement. The magnet is generally made with a high intensity Rare Earth magnetic circuit, which attract and secure unwanted iron present in the product stream. The grates can also have Ferrite magnetic circuit for special applications.

Ferrite Tube Magnet is used for the extraction of fine iron from free flowing granular / powder products. The 1" diameter tube is manufactured in length to suit customer requirement. The magnet is generally made with a high intensity Rare Earth magnetic circuit, which attract and secure unwanted iron present in the product stream.

They can also be supplied with ferrite magnetic pressings for less severe applications. The tube magnet is manufactured with Plain ends or with M6 threaded ends. It is recommended to use Ferrite Magnetic tubes for tramp iron particles and Rare Earth Magnetic tubes for trapping fine ferrous or weakly magnetic contamination. The magnetic circuit utilizes the strongest magnetic material available to recover fine iron contamination and prevent wash off of material collected.

Features:

• One inch dia tubes having a strength of 11500 Gauss.
• Tubes in Stainless Steel (316 / 304)construction.
• Powerful Rare Earth Magnetic circuit.
• Special circuits for 70 degree C, 120 degree C Aand 200 degree C applications.
• Powerful Ceramic circuits for tramp iron collection.
• Available in standard lengths beyond 6" in 2" increments.
• Also Custom made to any length.

Models:

• Tube with M6 threaded ends with countersunk socket head screw.
• Tubes with plain ends.
• Tubes with M6 threaded ends.